Table of Contents
If the garage door wont close, what even is the point of having a garage door, right?
Garage doors have automatic openers which you control.
However, sometimes, they might go against your wishes and not budge.
While they can oftentimes decide when and where to stop based on your settings, it can be a headache when they don’t answer to what you want.
Repairing this might be simple, but you need a garage door repair in San Antonio for that.
It is best to leave it to the professionals, but as a guide, here are some tips on your garage door wont close problem:
Leave the door’s path clear.
Obstructions or clutter that may be around the area below the door might be blocking the sensor.
This can cause the door to refuse to close.
With this, you need to examine the sensor light of the opener.
It depends on the brand of the opener, but it usually has these sensor lights that can flash or be off entirely whenever the beam is disturbed.
If you cannot find anything in the way of the door, it might be dirt.
There are debris, dirt, and even spider webs that may be around these sensor lights.
You should perform maintenance on the opener every once in a while.
If after you have cleaned the sensors and still no sign of the door closing down, make sure that the sensors are aligned with each other.
You can bend them so that they perfectly face each other.
Make sure that they are able to see the other effectively.
If you don’t know how to do that, contact a garage door repair in San Antonio.
Examine the limit settings of the door.
If the abovementioned steps have been done and the problem still persists, then it might be the fault of the limit settings.
These are settings that are also referred to as the travel limits.
As such, it has the ability to inform the opener the distance of how far the door should be able to travel before it is closed fully.
As a result, it can prevent the door from lowering down and crushing any object that might be obstructing its path.
If it has been set at such a high limit, the door, in return, can sense that the floor itself is obstructing its way.
In consequence of that, it will open again immediately after it has been closed.
Yet, there is no need to worry at all.
You can simply make adjustments by means of a screwdriver.
If you want specific directions on how to do that, you can examine the manual provided.
Troubleshoot the door’s mechanism.
Keeping the door always close is important for your safety as well as security.
Given that, it can be stressful if the door won’t close properly.
Improper maintenance can cause the door to malfunction, especially its components.
In return, the problem should be given a solution by means of cleaning.
Use a toothbrush to clean the metal rollers and remove the grime.
Use a non-silicone product for lubrication, like that of motor oil.
If you have some nylon rollers on your door, lubricate the bearings only.
Then, get rid of the dirt buildup that might be hindering the door from closing.
Finally, if this troubleshooting does not work, contact a garage door repair in San Antonio right away.
You can also search online for other maintenance and troubleshooting tips that might help you close the garage door.
Call Alamo City Garage Pros
Do you have a garage door wont close issue?
No need to worry!
Alamo City Garage Pros is the right company for you.
We are a company of garage door professionals who specialize in offering garage door repair in
San Antonio and garage door installation in San Antonio.
As experienced professionals, we guarantee only the best kind of service there is, as proven
and tested by our previous customers.
Don’t hesitate to call us!
For a garage door wont close, contact Alamo City Garage Pros.
Call us now!
