Table of Contents
Garage door spring repair: what you need to know is a must for homeowners.
As they are components that are not always seen, it is easy for us to ignore them sometimes.
However, it is actually one of the most important parts of the garage door.
Hence, when they start to deteriorate, the garage door’s operation can start to deteriorate as well.
When this happens, it is essential that a garage door repair in San Antonio is able to get their hands on it immediately.
Garage spring repair is in itself a daunting task, so handling it on your own is not recommended.
To give you a guide, however, here is garage door spring repair: what you need to know.
One: Types of Springs
Attempting to replace the spring on the garage door means you already have a clear view as well as knowledge of its different types.
Hence, you should educate yourself first about the inner workings of these springs, as well as their types.
This is the most important part of garage door spring repair: what you need to know.
As such, here are the two categories:
First type: Extension Springs
Extension springs are springs that are long and skinny.
They go in parallel to the horizontal tracks of the door and store their energy by means of stretching or extending whenever the door moves.
They come in three types: open-looped springs, double-looped springs, or clipped-end springs.
Open-looped springs are considered the weakest type of extension springs, as they rely on the open wire at the rear.
Once this wire breaks, you have to replace the entire spring itself, never mind if it is the only component that is faulty.
Double-looped springs, on the other hand, are far stronger than the first one, as it features two coils that are usually found at the rear of the spring that links to the pulley and the eyebolt.
Lastly, the clipped-end springs are the strongest of the three.
They can live longer and can be used frequently on garage doors that have a weight of more than 200lbs.
Second type: Torsion Springs
Your garage door can employ one to four torsion springs.
It just depends on the size, the weight, and the strength of the door.
This type of spring is broad, which can be located on a metal shaft that is on top of the opening of the door.
There are aluminum drums that are put on each side of the metal shaft, where the springs are winded to a particular torsion setting, which is relative to the system.
These torsion springs can either be standard, early-set, torque-master, or steel rolling-door springs.
The standard torsion springs are most commonly found on garage doors in the residential area, as they are lighter doors that only require a single spring for an effective operation.
Early-set springs, on the other hand, are quite similar to the standard ones.
However, they are placed on the middle of the shaft of the torsion.
Meanwhile, the steel rolling-door springs can normally be seen in some of the commercial and industrial buildings.
They are springs that are contained inside the torsion barrel.
For torque-master springs, they are usually enclosed inside the torsion shaft.
They are held in position by the winding cones that usually sit at the end of the rods.
Common types of springs that are generated for replacements in residential garage doors are usually extension springs.
But you can also make use of the standard or torsion springs.
Take note, however, that it is a dangerous task to undertake yourself.
As such, you should call for a garage door repair in San Antonio.
Call Alamo City Garage Pros
When it comes to garage door spring repair: what you need to know, no need to worry!
Alamo City Garage Pros is the right company for you.
We are a company of garage door professionals who specialize in offering garage door repair in
San Antonio and garage door installation in San Antonio.
As experienced professionals, we guarantee only the best kind of service there is, as proven
and tested by our previous customers.
Don’t hesitate to call us!
For the garage door spring repair: what you need to know, contact Alamo City Garage Pros.
Call us now!
