Table of Contents
It is a bit costly to have a coiling steel overhead doors repair done.
However, it does not mean that we cannot give you a satisfactory result.
If you want to avoid all that, however, you should employ maintenance every once in a while.
The benefits of maintenance include:
- Efficient, safe, and reliable garage door operation
- Life longevity for your garage door
- Decrease malfunction in the garage door system
- Get rid of costly downtime
- Save money and expenses
Yet, we cannot really prevent damages especially if the door is already old.
Hence, here are some of the issues that coiling steel overhead doors repair services can solve:
The door cannot be opened easily.
If you are having difficulty in opening the door, it may be caused by the springs.
If so, it is an indication that the spring requires more turns.
Thus, you will have to raise the door fully in its open position with an effort to add tension to the springs.
The turns should be 1/8 at a time.
Repeat this step until you feel the same resistance when you close the door as well as in opening it.
You can also make adjustments to the tension by means of a winding bar.
The door cannot be closed easily.
This issue requires the springs to have lower turns.
As such, what you need to do is to open the door and remove the tension of the springs one over eight at a time.
The same results above should be felt.
The door cannot be hanged easily.
The bellmouths of the coiling door might be improperly positioned away from the head place, thus permitting the rear locks to wedge.
You should loosen the affixed nit and find the edge of the bellmouth snug that is usually placed against the head plate.
Then, tighten it.
Another possible cause is the loosening of the end locks, which have caused it to fall out of position.
This can be solved by drilling out the loose fasteners and then reattaching them with a fastener that is far more suitable.
Another solution includes the damage of the curtain that is bent and damaged due to the wedge in the guides.
There are some instances where the bellmouths can be removed from the entrance guide and the curtain is placed down on the exterior of the guides themselves and then aligned.
Just be cautious not to permit the curtain to unwind rapidly.
Maintenance Tips
First, put oil on all the moving parts, except the clutch system on the fire doors as well as the wool pile that is found in the guides.
Put some lubricant on the garage door guides using a paste wax or a silicone spray.
If you have an automatic garage door, make it a habit to inspect the operator gear for any signs of oil leakage.
You can also add oil if necessary.
Examine the tension under the roller chain, which is located between the operator and the sprocket of the door.
If it has been loosened, just unfasten the bolts in the operator and then slide it to fasten the chain.
Put oil on the roller chain in the interior on the operators that have no gear reducer.
These should be done every three months.
For every six months, here’s what should be done:
Put oil on the roller chains that have been exposed as well as on the electric operators.
Lubricate the bearings that have grease fittings.
Any fire doors should be given a drop test, except for when you apply more frequent testing that is required by other codes.
Make use of the instructions to perform the drop test, which you can find inside the cover of the head plate.
Call Alamo City Garage Pros
Do you need a coiling steel overhead doors repair?
No need to worry!
Alamo City Garage Pros is the right company for you.
We are a company of garage door professionals who specialize in offering garage door repair in
San Antonio and garage door installation in San Antonio.
As experienced professionals, we guarantee only the best kind of service there is, as proven
and tested by our previous customers.
Don’t hesitate to call us!
For a coiling steel overhead doors repair, contact Alamo City Garage Pros.
Call us now!
